PowerShot A75
Specifications
Type of Camera
Compact digital still camera with built-in flash and 3.0x Optical/3.2x Digital/10x Combined Zoom
Image Capture Device
Type
1/2.7 inch type Charge-Coupled Device (CCD)
Total Pixels
Approx. 3.3 Million
Effective Pixels
Approx. 3.2 Million
Lens
Focal Length
5.4 - 16.2mm zoom lens (35mm film equivalent: 35 - 105mm)
Digital Zoom
3.2x
Focusing Range
Normal AF: 46cm/1.5 ft. - Infinity
Macro AF: 5 - 46cm/2.0 in. - 1.5 ft. (WIDE), 26 - 46cm/10 in. - 1.5 ft. (TELE)
Manual focus: 5cm/2.0 in. - Infinity (WIDE), 26cm/10 in. - Infinity (TELE)
Autofocus System
9-point AiAF/1-point AF(Fixed to center)
Viewfinder & Monitor
Viewfinder
Real-image optical zoom viewfinder
LCD Monitor
1.8 inch low-temperature polycrystalline silicon TFT color LCD
LCD Pixels
Approx. 110,000 pixels
LCD Coverage
100%
Aperture and Shutter
Maximum Aperture
f/2.8 - 8.0 (W), f/4.8 - 8.0 (T)
Shutter Speed
15 - 1/2,000 sec.
Exposure Control
ISO Sensitivity
AUTO*; ISO 50/100/200/400 equivalent
*Camera automatically sets the optimum speed.
Light Metering Method
Evaluative/ Center-weighted average/ Spot*
*Metering frame with Spot mode is center fixed.
Exposure Control Method
Program AE/ Aperture or Shutter-priority AE/ Manual
Exposure Compensation
+/- 2 EV in 1/3-stop increments
ND Filter
Not Available
White Balance
White Balance Control
Auto, Pre-set (Daylight, Cloudy, Tungsten, Fluorescent, Fluorescent H), or Custom White Balance
Flash
Built-in Flash
Operation Modes: Auto, Red-Eye Reduction ON/OFF, Slow-Sync
Flash Range
WIDE: 46cm - 4.2m (1.5 - 14 ft.)
TELE: 46cm - 2.5m (1.5 - 8.2 ft.)
MACRO: 26 - 46cm (10 in. - 1.5 ft.) (When sensitivity is set to Auto)
Recycling Time
Approx. 15 sec. or less (battery voltage=4.3V)
Flash Exposure Compensation
Not Available
Shooting Specifications
Shooting Modes
Auto, Creative (P, Tv, Av, M), Programmed Image Control Zone (Portrait, Landscape, Night scene, Fast shutter, Slow shutter, Stitch assist), Movies, Special Scene Mode (Foliage, Snow, Beach, Fireworks, Underwater, Indoor)
Photo Effects
Vivid, Neutral, Low Sharpening, Sepia and Black & White
Self-Timer
Operates with approx. 2 sec. or approx 10 sec. count-down.
Wireless Control
Not Available
Continuous Shooting
Approx. 2.2 shots/sec.
Image Storage
Storage Media
CompactFlash (CF) Card Type I
Print Order Format
Design rule for camera file system, Digital Print Order Format (DPOF) Version 1.1
Image Compression
Exif 2.2 (JPEG)
JPEG Compression Mode
SuperFine, Fine, Normal
Number of Recording Pixels
Still Image: 2,048 x 1,536 (Large), 1,600 x 1,200 (Medium 1), 1,024 x 768 (Medium 2), 640 x 480 pixels (Small)
Movie: 640 x 480, 320 x 240 or 160 x 120

File Name WIP625.exe

File Size 5.57 MB


Download and Installation Instructions
   

Overview
This driver is PTP (Picture Transfer Protocol) compliant the WIA driver for Windows XP made by Canon.
Changes
- The problem wherein uninstallation was not performed properly has been fixed.
Important
If you connect your camera to the Computer (OS: Windows XP) with a USB cable, it is not necessary to install the driver as your camera supports PTP and the standard driver of Windows XP.
However, there are some limitations as follows.
In this case, you need to download "Canon Camera WIA Driver 6.4.0 for Windows XP" below.
1. When a camera with a lot of images inside is connected and if you want to download images to your computer using Windows Explorer or [Cameras and Scanners Wizard], it may take a lot of time before starting to show thumbnails or starting the wizard.
* Time differs depending on the surroundings of the computer.
* It does not apply to uploading images to the computer using Canon brand applications (Ex. ZoomBrowser EX).
2. When a camera with a lot of images inside is connected and if you download images to the computer using ZoomBrowser EX, the following [Server Busy] message may be displayed in some case.
When this message is displayed, click the [Switch to..] button.
If the same message is displayed again, click the [Switch to..] button again till the message disappears.
Downloading and Installing the driver
- Perform the following download procedures.
- The driver is saved as a self-extracting, compressed file and it will be automatically installed.
1. Click the download file below, and then click [Save] in the [Download File] dialog box that appears.
* When you click [Open] in this dialog box, the procedures that follow below will be performed automatically (to step 4).
2. Specify the download destination (ex. Desktop), and then click [Save].
The file will be downloaded to the destination you specified in .exe format.
3. Double-click the downloaded file. The contents of the file will be extracted automatically.
4. When the extraction is complete, installation will start automatically.
If the installation is canceled before completion
If the installation is canceled, the temporary folder created during extraction will disapear. Restart the installation from step 3 above if you wish to install the driver again. If you clicked [Open] instead of saving the downloaded file in step 1, and also canceled the installation before it was complete, download the file again and perform the procedure above from the beginning.
?
5. the Language selection panel will be shown. Select the language of the driver, then click [OK].
6. When the install wizard is displayed, click [Next].
7. In the [Area Selection] panel, select the residential area and click [Next].
8. Click [Yes].
9. Click [Next].
10. When copying files process is finished, [WIA Driver Update Utility] dialog box will be displayed.
Follow the onscreen instructions to connect the camera to the computer with the USB cable.
If the [Event] dialog that allows you to select an application program to start, click [Cancel]. Close any applications which have automatically started.
11. Confirm that the name of the camera connected is displayed, and click [OK].
12. When the message [Driver has been updated] is shown, the installation is completed.
Click [OK], then the [Event] dialog box will appear allowing you to select an application program to start.
13. Click [Finish]. This will end the installation.