Specifications
OS Windows XP

Type of Camera
Compact digital still camera with built-in flash and 3x Optical / 2.5x Digital / 7.5x Combined Zoom
Image Capture Device
Type
1/2.7 inch charge coupled device (CCD)
Total Pixels
Approx. 2.0 Million
Effective Pixels
2.0 Million
Lens
Focal Length
5.4 - 16.2mm zoom lens (35mm film equivalent: 35 - 105mm)
Digital Zoom
2.5x
Focusing Range
Normal AF: 46cm/1.5 ft. - infinity
Macro AF: 5 - 46cm/2.0 in. - 1.5 ft. (wide-angle), 26 - 46cm/10 in. - 1.5 ft. (telephoto)
Manual focus: 5cm/2.0 in. - infinity (wide-angle), 26cm/10 in. - infinity (telephoto)
Autofocus System
Around most of picture area
AF lock and Manual focus are available
Viewfinder & Monitor
Viewfinder
Real-image optical zoom viewfinder
LCD Monitor
1.5 inch low temperature polycrystalline silicon TFT color LCD
LCD Pixels
Approx. 78,000 pixels
LCD Coverage
100%
Aperture and Shutter
Maximum Aperture
f/2.8 - 4.8
Shutter Speed
15 - 1/2,500 sec. Slow shutter speed of 1.3 sec. is only available in select modes
Exposure Control
ISO Sensitivity
AUTO/ISO 50/100/200/400 equivalent
Light Metering Method
Evaluative/Center-weighted average/Spot
Exposure Control Method
Program AE/Manual
Exposure Compensation
+/-2 EV in 1/3-stop increments
Auto Exposure Bracketing
Not Available
White Balance
White Balance Control
TTL Auto White Balance, Pre-set (Daylight, Cloudy, Tungsten, Fluorescent, Fluorescent H, or Flash), or Custom
Flash
Built-in Flash
Operation Modes: Auto/ON/OFF, Red-Eye Reduction, Red-Eye Reduction ON/OFF
Flash Range
WIDE: 46 - 4.2m
TELE: 46 - 2.5m
MACRO: 26 - 46cm (When sensitivity is set to ISO 100 equivalent)
Recycling Time
Approx. 10 sec. or less
Flash Exposure Compensation
Not Available
Shooting Specifications
Shooting Modes
Auto, Creative (P, Av, Tv, M, Custom 1, Custom 2), Programmed Image Control Zone, Image (Portrait, Landscape, Night Scene, Stitch Assist, Movie)
Photo Effects
Vivid, Neutral, Low Sharpening, Sepia and Black&White
Self-Timer
Operates with approx. 2 sec. or approx 10 sec. count-down
Wireless Control
Not Available
Continuous Shooting
Approx. 2.6 frames/ sec.
Image Storage
Storage Media
CompactFlash (CF) Card Type I
File Format
Design rule for Camera File system (DCF*1)
Print Order Format
Digital Print Order Format (DPOF) Version 1.1
Image Compression
Still Image: JPEG (Exif 2.2 compliant)
JPEG Compression Mode
SuperFine, Fine or Normal
Number of Recording Pixels
1600 x 1200 (Large), 1024 x 768 (Medium), 640 x 480 pixels (Small)
Movie: 320 x 240 or 160 x 120
Playback Specifications
Playback Modes File
Single, Index (9 thumbnails), Magnification (2x to 10x), Movie, Slide Show
Erasing Specifications
Erase Modes
Single Image, All Images, Movie: Part of movie, All movie
Interfaces
Computer Interface
Universal Serial Bus (USB) (mini-B jack)
Video Out
NTSC or PAL
Other
CF card slot (accept type I and type II cards). Direct connection to Canon CP Printers and Direct Photo Printers (no computer required)
Power Supply
Power Source
1. Size AA Alkaline battery x4
2. Rechargeable size AA NiMH battery x4 (NB-1AH)
3. Compact Power Adapter (ACK-600)
Shooting Capacity
Approx. 250 shots/Approx. 800 shots (LCD monitor ON)
Approx. 350 shots/Approx. 1000 shots (LCD monitor OFF)
(Alkaline battery/ NB-1AH)
Playback Time
Approx. 280 min/Approx 280 min. (Alkaline battery/ NB-1AH)
Physical Specifications
Operating Temperature
32 - 104°F (0 - 40°C)
Operating Humidity
10 - 90%
Dimensions (WxHxD)
3.98 x 2.52 x 1.24 in./101.0 x 64.0 x 31.5mm (Excluding protrusions)
Weight
Approx. 7.58 oz./215g (Camera body only)
Computer System Requirements
Mac Requirements
Computer Model: Power Macintosh, PowerBook, iMac, eMac or iBook
OS: OS 9.0 - 9.2 or OSX 10.1 - 10.2.
CPU: PowerPC.
Interface: USB (Models with Apple genuine USB interface only).
PC Requirements
Computer Model: IBM PC/AT compatible
OS: Microsoft Windows 98 (including Second Edition)/ Me/ 2000/ XP.
CPU: Pentium 150MHz or higher processor (Windows 98/ME/2000), Pentium 300MHz or higher processor (Windows XP).
Interface: USB (Windows 98/ Me/ 2000/ XP pre-install model only).

File Name : zb641xpupd-en.exe


File Size : 131.63 MB
Changes of ZoomBrowser EX 6.4.1:

1. Uses separate files for Windows Vista and Windows XP updaters and operating systems (The functions of the application are the same.)

2. Supports PowerShot G11, PowerShot S90, IXY DIGITAL 930 IS/PowerShot SD 980 IS Digital ELPH/Digital IXUS 200 IS, IXY DIGITAL 220 IS/PowerShot SD 940 IS Digital ELPH/Digital IXUS 120 IS, PowerShot SX20 IS, and PowerShot SX120 IS
(In order to connect with above mentioned products, it is necessary to overwrite the application by installing the CD-ROM bundled with the products.)

3. Supports EOS 7D

4. The Russian version is added. However, the following limitations applies to the Russian version.
Limitations: English indications appear when using a USB cable to connect with previous models (compact digital cameras released by 1H 2009 and all supported digital video camcorders) to downloard images.

Environment
   

1. Supported OSes
Windows XP SP2, SP3

2. Supported PCs
PCs with one of the above OSes installed and that have USB ports installed as standard equipment.
CPU;
-Still/Movie(AVI): Pentium 1.3GH or faster
-Movie(MOV): Core 2 Duo 2.6GHz or faster(Full HD), Core 2 Duo 1.66GHz or faster(SD/HD)
RAM;
-Still/Movie(AVI): 512MB or greater
-Movie(MOV): 1GB or greater

3. Installation/Update Requirements
Update Requirements:
The following software must be installed on the PC.
- ZoomBrowser EX 3.x/ 4.x/ 5.x /6.x

4. Display
1024 x 768 or greater

Caution
1. RAW Image Task(RAW image processing) is not included in ZoomBrowser EX 6.4.1 Updater. If you want to use them in ZoomBrowser EX 6.4.1, please download and install ZoomBrowser EX 6.1.1a Updater after installing ZoomBrowser EX 6.4.1 Updater.
ZoomBrowser EX 6.1.1a Updater can be downloaded separately.

2. To Users of the EOS DIGITAL/PowerShot G10/PowerShot SX1 IS(RAW model) camera:
Users of the following digital cameras are asked to use the Digital Photo Professional software to install ZoomBrowse EX 6.4.1.
The latest version of Digital Photo Professional can be downloaded separately.
Users of the digital SLR camera are asked to use EOS Utility at the same time.
The latest version of EOS Utility can be downloaded separately.

Supported Models:
EOS 5D Mark II, EOS 50D, EOS Kiss X3/ EOS REBEL T1i/ EOS 500D ,EOS Kiss F/ EOS Rebel XS/ EOS 1000D, EOS Kiss X2/ EOS Rebel XSi/ EOS 450D DIGITAL, EOS-1Ds Mark III, EOS 40D, EOS-1D Mark III, EOS DIGITAL Kiss X/ EOS DIGITAL REBEL XTi/ EOS 400D DIGITAL, EOS-1D, EOS-1Ds, EOS-1D Mark II, EOS-1Ds Mark II, EOS-1D Mark II N, EOS 5D, EOS 10D, EOS 20D, EOS 20Da, EOS 30D, EOS Kiss Digital/ EOS DIGITAL REBEL/ EOS 300D, EOS Kiss Digital N/ EOS DIGITAL REBEL XT/ EOS 350D, EOS D30, EOS D60
PowerShot G10, PowerShot SX1 IS (RAW model)

3. Precautions for version 3.x Users
To Users of ZoomBrowser 3.x:
3-1. In order to update to ZoomBrowser EX 6.4.1, it is necessary that ZoomBrowser EX 3 be installed on the target computer.
3-2. It is necessary to transfer the database files as follows:
If you want to display titles and comments added with ZoomBrowser EX 3, you will need to convert the database file used in ZoomBrowser EX 3 for use with ZoomBrowser EX 4, 5 or 6 before using these applications for the first time.
Please note that if ZoomBrowser EX 4, 5 or 6 is used before this conversion, the titles, comments, sound annotation information added with ZoomBrowser EX 3 will be erased.
- From the Start menu, select All Program -> Accessories -> Explorer to start Windows Explorer.
- Open the Program folder under the folder in which ZoomBrowser EX 4, 5 or 6 is installed.
- Double-click the dbconverter.exe (or dbconverter) icon in that folder.
- Specify the database file that you have been using and click the Start button
Example: C:\Program Files\Canon\ZoomBrowser EX\ Database\My Database.zbd)
- When a message appears indicating that the database conversion is complete, click OK.
3-3. Database File Conversion Restrictions
There are restrictions on folders under the Program Files folder.
In ZoomBrowser EX 4, 5 or 6, folders under the Program Files folder are not displayed. Therefore, images in the Library One folder, which was the default in ZoomBrowser EX 3, cannot be viewed in ZoomBrowser EX 4, 5 or 6.
To see the images in the Library One folder, use Windows Explorer to move the images to a location outside the Program Files folder.
* Please move the folders after converting the database file.
3-4. RAW Image Converter 1.x cannot be started from ZoomBrowser EX 4, 5 or 6.
When converting RAW images, please either start RAW Image Converter separately or use ZoomBrowser EX.
3-5. There is no longer a TWAIN interface in ZoomBrowser EX 4, 5 or 6. Please use ZoomBrowser EX to download images.
3-6. Windows Meta Files, FlashPix are no longer supported.
3-7. The Time Tunnel viewer function has been eliminated.
3-8. The 360-degree viewer for panoramic images has been eliminated.
3-9. The function for displaying the camera owner's name in slideshows has been eliminated.

Setup
   

Please refer to the following instructions on how to download and install the software.

Check whether ZoomBrowser EX 3.x, 4.x, 5.x or 6.x is already installed on the PC.

1. Download "zb641xpupd-en.exe" from the download page.

2. Double-click the "zb641xpupd-en.exe" file.

3. Follow the on-screen instructions to complete the installation.
(If the User Account Control window appears, follow the on-screen instructions to proceed.)

4. ZoomBrowser EX 3.x users need to carry out the tasks that are described in the precautions.
4-1. Transfer the database files.
4-2. Move images out of the Library One Folder.

click here to download
You are not  allowed to view links.
Register or Login