PowerShot A400

Specifications

Type of Camera
Compact digital still camera with built-in flash and 2.2x Optical/3.2x Digital/7x Combined Zoom
Image Capture Device
Type
3.2 M pixels, 1/3.2 inch Charge Coupled Device (CCD)
Total Pixels
Approx. 3.3 Million
Effective Pixels
Approx. 3.2 Million
Lens
Focal Length
5.9 (W) - 13.2 (T) mm f/3.8 (35mm film equivalent: 45-100mm)
Digital Zoom
3.2x
Focusing Range
Normal AF: 1.5 ft./47cm to Infinity
Macro AF: 2 in.-1.5 ft/5-47cm (WIDE), 1 ft-1.5 ft/30-47cm(TELE)
Autofocus System
9-point AiAF/1-point AF (Fixed to center)AF-assist Beam On/Off
Viewfinder & Monitor
Viewfinder
Real-image optical zoom viewfinder
LCD Monitor
1.5 inch low-temperature polycrystalline silicon TFT color LCD (w/vari-angle function)
LCD Pixels
Approx. 115,000 pixels
LCD Coverage
100%
Aperture and Shutter
Maximum Aperture
f/3.8 (W/T
Shutter Speed
1 - 1/1500 sec.
Exposure Control
ISO Sensitivity
AUTO, ISO 50/100/200/400 equivalent
Light Metering Method
Evaluative / Center-weighted average / Spot* *Metering frame with Spot mode is center fixed.
Exposure Control Method
Program AE
Exposure Compensation
+/- 2 stops in 1/3 stop increments
ND Filter
Not Available
White Balance
White Balance Control
Auto, Pre-set (Daylight, Cloudy, Tungsten, Fluorescent, Fluorescent H), or Custom
Flash
Built-in Flash
Operation Modes: Auto On/Off, Red-Eye Reduction is available
Flash Range
NORMAL: 47cm-2m/1.5-6.6 ft. (W/T)
MACRO: 30 - 47cm/1 ft -1.5 ft (When sensitivity is set to Auto)
Recycling Time
Approx. 10 sec. or less (battery voltage=3.0V)
Flash Exposure Compensation
Not Available
Shooting Specifications
Shooting Modes
Auto, Manual, Stitch Assist, Movies, Special Scene (Portrait, Night Scene, Foliage, Snow, Beach, Fireworks, Underwater, Indoor)
Photo Effects
Off, Vivid, Neutral, Low Sharpening, Sepia and Black & White
Self-Timer
Activates shutter after an approx. 10 sec. or approx. 2 sec. delay
Wireless Control
Not Available
Continuous Shooting
Approx. 1.3 shots/sec.
Image Storage
Storage Media
SD Memory Card
Print Order Format
Digital Print Order Format (DPOF) Version 1.1 Image transfer is not available
Image Compression
Exif 2.2 (JPEG)
JPEG Compression Mode
SuperFine, Fine, Normal
Number of Recording Pixels
Still Image: 2,048x1,536 (Large), 1,600x1,200 (Medium 1), 1,024x768 (Medium 2), 640x480 pixels (Small)Postcard Date Imprint Mode: 1,600x1,200 (Compression is set to Fine)
Playback Specifications
Playback Modes File
Single (1 image), Index (9 thumbnail images)Magnified, Auto Rotate, Rotation, Histogram, Sound Memo (up to 60 sec.), Auto Play
Erasing Specifications
Erase Modes
Still Images: Single Image, All Images Movie: Part of Movie, All Movie
Interfaces
Computer Interface
USB (Universal Serial Bus) mini-B/PTP
Video Out
NTSC or PAL
Audio Out
Monaural
Other
SD card slot. Direct connection to Canon Direct Photo Printer and PictBridge compatible printers.
Power Supply
Power Source
1. Size AA Alkaline battery x2
2. Rechargeable size AA NiMH battery (NB-2AH) x2
3. Compact Power Adapter (CA-PS800) - AC Adapter Kit ACK800
Shooting Capacity
AA NiMH: LCD On - Approx. 300; LCD Off - Approx. 750
Playback Time
Approx. 270 minutes (Under Canon's standard conditions*1 with fully charged battery)
Physical Specifications
Operating Temperature
32 - 104° F/0 - 40° C
Operating Humidity
10 - 90%
Dimensions (WxHxD)
4.21x2.10x1.45 in./107.0x53.4x36.8mm (Excluding protrusions)
Weight
Approx. 5.82 oz./165g (camera body only)

File Name WIP625.exe



File Size 5.57 MB

Download and Installation Instructions
   

Overview
This driver is PTP (Picture Transfer Protocol) compliant the WIA driver for Windows XP made by Canon.
Changes
- The problem wherein uninstallation was not performed properly has been fixed.
Important
If you connect your camera to the Computer (OS: Windows XP) with a USB cable, it is not necessary to install the driver as your camera supports PTP and the standard driver of Windows XP.
However, there are some limitations as follows.
In this case, you need to download "Canon Camera WIA Driver 6.4.0 for Windows XP" below.
1. When a camera with a lot of images inside is connected and if you want to download images to your computer using Windows Explorer or [Cameras and Scanners Wizard], it may take a lot of time before starting to show thumbnails or starting the wizard.
* Time differs depending on the surroundings of the computer.
* It does not apply to uploading images to the computer using Canon brand applications (Ex. ZoomBrowser EX).
2. When a camera with a lot of images inside is connected and if you download images to the computer using ZoomBrowser EX, the following [Server Busy] message may be displayed in some case.
When this message is displayed, click the [Switch to..] button.
If the same message is displayed again, click the [Switch to..] button again till the message disappears.
Downloading and Installing the driver
- Perform the following download procedures.
- The driver is saved as a self-extracting, compressed file and it will be automatically installed.
1. Click the download file below, and then click [Save] in the [Download File] dialog box that appears.
* When you click [Open] in this dialog box, the procedures that follow below will be performed automatically (to step 4).
2. Specify the download destination (ex. Desktop), and then click [Save].
The file will be downloaded to the destination you specified in .exe format.
3. Double-click the downloaded file. The contents of the file will be extracted automatically.
4. When the extraction is complete, installation will start automatically.
If the installation is canceled before completion
If the installation is canceled, the temporary folder created during extraction will disapear. Restart the installation from step 3 above if you wish to install the driver again. If you clicked [Open] instead of saving the downloaded file in step 1, and also canceled the installation before it was complete, download the file again and perform the procedure above from the beginning.
?
5. the Language selection panel will be shown. Select the language of the driver, then click [OK].
6. When the install wizard is displayed, click [Next].
7. In the [Area Selection] panel, select the residential area and click [Next].
8. Click [Yes].
9. Click [Next].
10. When copying files process is finished, [WIA Driver Update Utility] dialog box will be displayed.
Follow the onscreen instructions to connect the camera to the computer with the USB cable.
If the [Event] dialog that allows you to select an application program to start, click [Cancel]. Close any applications which have automatically started.
11. Confirm that the name of the camera connected is displayed, and click [OK].
12. When the message [Driver has been updated] is shown, the installation is completed.
Click [OK], then the [Event] dialog box will appear allowing you to select an application program to start.
13. Click [Finish]. This will end the installation.

click here to download
You are not  allowed to view links.
Register or Login